閱讀排行榜

手寫達人

猜您喜歡

標題C64210 高強度鋁硅青銅

提供者：東莞市協昌金屬材料有限公司發布時間：2021/10/19 閱讀次數：183次 >>進入該公司展臺

典型用途

電氣：桿線五金
工業：軸承（高強度/耐腐蝕）、襯套（飛機）、化學工藝設備、酸洗設備、閥體、閥桿
船舶：螺栓、鎖緊墊圈、螺母、螺釘

Similar or Equivalent Specification

CDA	ASTM	SAE	AMS	Federal	Military	Other
C64210	B150 B150M

Chemical Composition

Cu%1	Pb%	Sn%	Zn%	Fe%	Ni%2	Al%	Mn%	Si%	As%
Chemical Composition according to ASTM B150/B150M-19 1Cu value includes Ag. 2Ni value includes Co. Note: Cu + Sum of Named Elements, 99.5% min. Single values represent maximums.
Rem.	0.05	0.20	0.50	0.30	0.25	6.30- 7.00	0.10	1.50- 2.00	0.15

Machinability

Copper Alloy UNS No.	Machinability Rating	Density (lb/in3 at 68 °F)
C64210	60	0.278

Mechanical Properties

Mechanical Properties according to ASTM B150/B150M-19

C64210

HR50 Drawn ａnd Stress Relieved Temper (unless noted otherwise)

SIZE RANGE: UNDER 1/2" ROD AND BAR

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
90	620	45	310	9	80-100

SIZE RANGE: 1/2" TO 1" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
85	585	45	310	12	80-100

SIZE RANGE: OVER 1" TO 2" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
80	550	42	290	12	80-100

SIZE RANGE: OVER 2" TO 3" ROD AND BAR INCLUSIVE

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
75	575	35	241	15	70-95

SIZE RANGE: OVER 3" TO 4" ROD AND BAR INCLUSIVE (M20 as hot rolled)

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
70	483	30	207	15	65-95

SIZE RANGE: OVER 4" TO 6" ROD AND BAR (M30 as hot extruded)

Tensile Strength, min		Yield Strength, at 0.5% Extension Under Load, min		Elongation, 4x Diameter or Specimen Thickness, min	Rockwell "B" Hardness	Remarks
ksi	MPa	ksi	MPa	%	min to max HRB
70	483	25	172	15	65-95

Physical Properties

	US Customary	Metric
Physical Properties provided by CDA
Density	0.278 lb/in3 at 68 °F	7.7 gm/cm3 at 20 °C
Specific Gravity	7.7	7.7

關鍵詞：C64210 鋁硅青銅鋁青銅

上一篇：241246.500 Powerpack 48/5800 48V 5800W ELTEK易達通信電源整流模塊批發ELTEK易達高頻開關電源模塊ELTEK易達整流模塊ELTEK易達直流屏充電模塊下一篇：離心式切削液除油機

該提供者的其它文獻

版權聲明

① 凡本網注明"來源：易推廣"的所有作品，版權均屬于易推廣，未經本網授權不得轉載、摘編或利用其它方式使用。已獲本網授權的作品，應在授權范圍內

使用，并注明"來源：易推廣"。違者本網將追究相關法律責任。

② 本信息由注冊會員：東莞市協昌金屬材料有限公司發布并且負責版權等法律責任。