
您的位置:首頁 > 技術文獻 > 技術交流 > WXT-0653瀝青電荷儀操作使用說明
WXT-0653瀝青電荷儀操作使用說明
操作說明:
接通電源,將時間設置為“3分”,按下“啟動”開關,三分后自動斷電。如需繼續下次試驗,按下“復位”即進入下工作狀態。如終止工作再次按下“啟動”即結束整個過程。
技術參數:
1、電源電壓:220V、50HZ
2、輸出電壓:直流6V
3、電板尺寸;長100mm 寬10mm 厚1mm
4、控制時間:(0-99min連續可調)
儀具與材料:
1、燒杯;1000mL。
2、電板:2塊,銅制,每塊板長100mm,寬10mm,厚1mm。
3、直流電源:6V,
4、表。
5、濾篩:篩孔為1.18mm
6、其它:汽油、洗液等。
、產品本廠承諾所有的系列產品,嚴格按照國標、部標標準組織生產,并承諾所提供的產品是全新的未曾使用過的,從原材料進廠到設備出廠都經過嚴格的和完善的檢驗。
Our factory promises that all series of products will be produced in strict accordance with the National Standard and the ministry standard, and that the products will be brand-new and unused, from the raw materials into the factory to the equipment factory after strict and perfect inspection.
二、售后服務
產品售后服務工作由本廠售后服務部與全國的授權代理商和經銷商共同完成。
The after-sales service of the after-sales service products shall be jointly completed by the after-sales Service Department of our factory and authorized agents and distributors throughout the country.
WXT-0653瀝青電荷儀操作使用說明
關鍵詞:瀝青電荷儀
① 凡本網注明"來源:易推廣"的所有作品,版權均屬于易推廣,未經本網授權不得轉載、摘編或利用其它方式使用。已獲本網授權的作品,應在授權范圍內
使用,并注明"來源:易推廣"。違者本網將追究相關法律責任。② 本信息由注冊會員:獻縣鵬翼建筑儀器廠 發布并且負責版權等法律責任。