產品展示
優質供應
詳細內容
日本HIOS電動螺絲刀SS系列袖珍型/標準型特點:
*適合精密零件組裝的吸震型螺絲刀
減輕螺絲刀離合器動作產生的沖擊,把對工件的沖擊及震動影響控制在*小范圍內,
*適合硬盤驅動器,液晶,高密度基板等各種精密零件的組裝
| 拉桿起動式型號 | SS-2000 | SS-3000 | SS-4000 | SS-6500 | SS-7000 | ||
| 輸出扭矩范圍 | N＊m | 0.02-0.2 | 0.03-0.2 | 0.1-0.45 | 0.25-1.3 | 0.3-2 | |
| lbf＊in | 0.17-1.7 | 0.3-1.7 | 0.9-3.9 | 2.2-11 | 2.6-17.4 | ||
| (kgf＊cm) | 0.2-2 | 0.3-2 | 1-4.5 | 2.5-13 | 3.0-20 | ||
| 扭矩切換 | 無級調節 | 無級調節 |
|
|
| ||
| 無負載轉速(r.p.m)±5%(HI/LOW) | 680/490 | 100/670 | 100/690 | 900/600 | 750 | ||
| 適用螺絲規格(mm) | 小螺絲 | 1.0-2.3 | 1.0-2.0 | 1.4-2.6 | 2.0-3.0 | 2.0-4.0 | |
| 自攻螺絲 | 1.0-2.0 | 1.0-1.7 | 1.4-2.3 | 2.0-3.0 | 2.0-4.0 | ||
| 適用刀頭 | Hios H4 | Hios H4 | Hios H4 or 1/4HEX | Hios H5 or 1/4HEX | Hios H5 or 1/4HEX | ||
| 適用變壓器 | CLT-50 | OK | OK | OK | OK | NG | |
| CLT-65 | OK | OK | OK | OK | OK | ||
| CLT-100 | OK | OK | OK | OK | OK | ||
| MC-70L | OK | OK | OK | OK | OK | ||
| 附件 | 刀頭 | (H4) | +#0 φ2.0×40mm 1支 +#0 φ2.5×40mm 1支 | +#0(φ2.0×40mm) 1支 +#0(φ2.5×40mm) 1支 | +#0(φ2.0×40mm) 1支 +#0(φ2.5×40mm) 1支 | NG | NG |
| (H5) | NG | NG | NG | +#1(φ5.0×60mm) 1支 +#2(φ5.0×60mm) 1支 | +#1(φ5.0×60mm) 1支 +#2(φ5.0×60mm) 1支 | ||
| (1/4 HEX) | NG | NG | +#1(φ5.0×50mm) 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | +#1(φ5.0×50mm) 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | +#1φ5.0×50mm 1支 +#2(φ5.0×50mm) 1支 -(φ5.0×50mm) 1支 | |
| 碳刷 | NG | 1對 | 1對 | 1對 | 1對 | |
| 電源線 | 1.5m(5P) | 1.5m(5P) | 1.5m(5P) | 2 m(5P) | 2 m(5P) | |
