產品展示
優質供應
詳細內容
kVP表kVp Meter ａnd Exposure Time Meter
The ECC kVp meter ａnd exposure timer Measures the peak x-ray accelerating voltage from tungsten x-ray generators. To measure peak kV the user simply places the instrument in the beam ａnd takes an x-ray. In addition to measuring kVp, the unit also measures the exposure time ａnd displays the x-ray waveform type. The Capintec kVp Meter can be used on radiographic, fluoroscopic ａnd dental x-rays. There is a high resolution mode which is used for measurements on older x-rays ａnd x-rays with slow rise times. The kVp Meter has a large display which is readable from outside the x-ray room.
Features
Small Hand Held Size
Easy to use
Non invasive
High Accuracy
Two Year Warranty
Measures kVp ａnd exposure time
simultaneously
Compact size
Durable ABS Plastic Case
Custom Carrying Case Option
Specifications
Range
45 to 125 kV
kVp Accuracy
2% +/- 1 kV, at 25 to 100 mA
18 to
Tungsten target x-ray tube with 1.5
mm Al equivalent filtration
Exposure Time Accuracy
2% +/- 3 millisecond
Minimum exposure time is 100
millisecond
Minimum Exposure Time （kVp
Measurement）
100 millisec - High Speed Mode
（normal）
200 millisec - High Resolution Mode
Minimum Current （mA）
7 mA at 50 kV,
source
Also depends on focus / collimation
Display
0.4"（
8 Character Alphanumeric
Power
4 AA Batteries accessible from bottom
of case
Low
48 hours continuous
Typically 9 months of normal use
Controls/Indicators
ON/OFF Switch
Illuminated push-button with green
power-on indication
Mode Switch
Momentary push-button
8 Character Liquid Crystal Display
Oscilloscope output
Physical Size
150 x 120 x
5.9 x 4.7 x 2.3 inches
Weight
Connections
None required for normal kVp
measurement
Optional Accessories
Padded Cordura Carrying Case
Oscilloscope Interface Cable
Typical Applications
Measurement of Exposure
Verification of peak x-ray voltage
Constancy checks
X-ray calibration
Quality Assurance
Measurement of X-ray Exposure Time
Half Value Layer determination
Troubleshooting ａnd Repair of X-rays
