產品展示
BNC505數字延遲發生器
點擊次數：278發布時間：2009/11/2 0:00:00
更新日期：1900/1/1 0:00:00
所 在 地：美國
產品型號：
優質供應
詳細內容
the newly released model 565 digital delay pulse generator and 505 pulse generator provide 2, 4 or 8 delay and width outputs capable of synchronizing to either external or internal triggers. the model 565 digital delay pulse generator features delay and width resolution of 500 ps. the model 505 pulse generator offers delay and width resolution of 100 ns.
channels for the model 565 digital delay pulse generator and 505 pulse generator can be se-lectively gated, enabled or disabled with each channel delivering se-lectable output polarities and an independently adjustable level. these models also allow the se-lection of a reference to which each channel is synchronized. for example, any channel can be synchronized to an external trigger (to), internal trigger (also to) or the leading edge of any other channel (t1 thru tn). the channels operate in modes independent of the other channels. mode availability includes gated, enabled, burst, single shot, normal, duty cycle (divide by n).
the model 565 digital delay generator or model 505 pulse generator also operate in triggering modes common to all channels. a continuous mode provides pulse periods with 500 ps and 100 ns resolution, for the 565 digital delay generator and 505 pulse generator respectively. this allows orders-of-magnitude finer control of the triggering interval than with a frequency controller. a single-shot mode produces a single pulse with each pushbutton or each external trigger. a burst mode produces a burst of pulses se-lectable from 1 to a million. the duty cycle mode provides m pulses on and n pulses off (divide by n, if you want). both models provide the ability to store several complete setups into memory for future recall. the model 565 digital delay generator supports rs232, gpib, ethernet and usb programming. the 505 pulse generator supports rs232 and gpib. the 565 has 3 output se-lections; the 505 offers one. standard with the model 565 digital delay generator are a fast logic output, an adjustable level up to 12 v, and an optional 35 v. the model 505 pulse generator offers an adjustable level up to 20 v.
specifications:
| model 565 digital delay generator | model 505 pulse generator | ||
configuration | 2,4, or 8 channels of delays and widths per instrument | 2,4, or 8 channels of delays and widths per instrument | ||
timing delays and widths | ||||
delay | 0 to 1000 seconds with 500 ps resolution | 0 to 1000 seconds with 100 ns resolution | ||
width | 10 ns to 1000 seconds with 500 ps resolution | 100 ns to 1000 seconds with 100 ns resolution | ||
accuracy | 1 ns + 0.0001 x time | 10 ns + .0001 delay | ||
time base | 100 mhz, 25 ppm crystal oscillator | 50 mhz, 50 ppm crystal oscillator | ||
rms jitter | 250 ps | < 5 ns | ||
trigger modes | continuous, external trigger, external gate, single shot, burst, duty cycle |
|
| |
external trigger/gate |
|
| ||
rate | 0 to 5 mhz | 0 to 2mhz |
|
|
in-sertion delay | < 150ns | < 250ns |
|
|
threshold | 200 mv - 15 v | 200 mv - 15 v |
|
|
trigger slope | rising or falling edge, se-lectable | rising or falling edge, se-lectable |
|
|
gate | active low or active high, se-lectable | active low or active high, se-lectable |
|
|
impedance | 1000 ohms | 1000 ohms |
|
|
internal rep rate generator |
|
| ||
rate | 0.0002 hz to 5 mhz | 0.001 hz to 2mhz |
|
|
accuracy | 1 ns + 0.0001 x period | 5 ns + 0.0001 x period |
|
|
rms jitter | 250 ps | < 500 ps |
|
|
burst mode | 1 to 1000000 pulses | 1 to 1000000 pulses |
|
|
single shot | pushbutton provides a single trigger | pushbutton provides a single trigger |
|
|
burst | 1000 ohms |
|
| |
duty cycle | set timing events at on for m pulses and then off for n pulses. |
|
| |
outputs | se-lectable, a fixed amplitude ttl/cmos or adjustable level | adjustable to 20 v |
|
|
impedance | 50 ohm | 50 ohm |
|
|
adjustable amplitude |
|
| ||
slew rate | >.2 v/ns | >.2 v/ns |
|
|
amplitude | 1 v - 6 v into 50 ohm load | 1 v - 10 v into 50 ohm load |
|
|
peak current | 150 ma per channel | 150 ma per channel |
|
|
average current | 200 ma ave. (total for all channels) | 200 ma ave. (total for all channels) |
|
|
polarity | positive (active high) or negative (active low) | positive (active high) or negative (active low) |
|
|
ttl / cmos |
|
| ||
transition time | < 5 ns | n/a |
|
|
amplitude | 4 v nominal from 50 ohms | n/a |
|
|
computer interface |
|
| ||
rs232 | 4800, 9600, 19200, & 38400 | 4800, 9600, 19200, & 38400 |
|
|
ieee 488 | standard | standard |
|
|
usb | standard | n/a |
|
|
ethernet | optional (replaces usb) | n/a |
|
|
model se-lection |
|
| ||
model 565-2c/505-2c | 2 channels | 2 channels |
|
|
model 565-4c/505-4c | 4 channels | 4 channels |
|
|
model 565-8c/505-8c | 8 channels | 8 channels |
|
|
options | 35 v high voltage outputs into 50 ohms | n/a |
|
|
accessories | 19" rack mount | 19" rack mount |
|
|
ordering instructions: |
model 505 - x |
x is number of channels (se-lect 2c, 4c or 8c) |
usb, e and h option not available on 505 |
19" rack mount for model 505 - order p/n 6914 |
3 year service and calibration agreement - order p/n 8000-3 |
model 565 - x - y |
x is number of channels (se-lect 2c, 4c or 8c) |
y is 565 specific options (se-lect h for 35v outputs＊＊, se-lect e for ethernet interface＊) |
19" rack mount for model 565 - order p/n 6923 |
3 year service and calibration agreement - order p/n 8000-3 |
＊ ethernet communication option replaces usb port on rear panel |
＊＊ additional high voltage output on rear panel |
